All Categories
all-categories
Juno Lighting -- HE Williams Lighting -- GE Lighting -- GE Lamps -- Satco Lamps /Asset/led_lighting_2_large.jpg
LA Lugs and Molds must be ordered separately /Asset/Cable-2-Bus-Lug---LA---Cable-to-Lug.jpg
ERICO is dedicated to continuous product improvement to meet its customers' needs and maintain the highest level of satisfaction. The introduction of CADWELD® electrical connections in 1938 enabled them to be quickly recognized as the ultimate connection for rail, cathodic, power and grounding applications.
Continuing the tradition of technical leadership, CADWELD® PLUS was developed as a simplified method of performing exothermically welded electrical connections. This trusted system now features a new CADWELD PLUS cup design for the integrated welding material package which has streamlined the installation process by eliminating ignition materials.
The tamper proof, integrated welding material package consists of a steel cup containing CADWELD® patented welding material alloys and an ignition source. This newly shaped welding material package is designed for use in all standard CADWELD® molds, including CADWELD® MULTI. Once placed in the CADWELD® mold, the welding material is electronically ignited using a simple battery-powered control unit with a six-foot lead.
CADWELD® PLUS connections offer all the benefits of conventional CADWELD® connections:
After the termination clip is installed on the ignition strip, the installer pushes and holds the ignition button to start a charging and discharging sequence. Within a few seconds the control unit sends a predetermined voltage to the ignition strip and the reaction is initiated. /Asset/65PLUSF20_3.jpg
Sold in Standard Packages Only
CADWELD Weld Metal is a mixture of copper oxide and aluminum, packaged by size in plastic tubes. Each tube contains the starting material at the bottom of the plastic tube, with the Weld Metal on top. These materials are not explosive and not subject to spontaneous ignition. These containers are packaged in boxes along with metal disks. Each weld uses one disk.
Five types of CADWELD Weld Metal are used for grounding connections:
![Lithonia Indoor/Outdoor LED Lighting Lithonia Indoor/Outdoor LED Lighting](/ImgSmall/led_lighting_2_large.jpg)
LED Lighting
Lithonia Lighting -- Cooper Lighting -- Hubbell Lighting -- Cree Lighting -- Phillips Lighting -- Howard LightingJuno Lighting -- HE Williams Lighting -- GE Lighting -- GE Lamps -- Satco Lamps /Asset/led_lighting_2_large.jpg
![Inventory-Surplus-v3.png Inventory-Surplus-v3.png](/ImgSmall/Inventory-Surplus-v3.png)
SURPLUS / CLEARANCE
(8)SURPLUS / CLEARANCE ITEMS. These items are new in box or new opened box. Please feel free to call and check quantity available.
/Asset/Inventory-Surplus-v3.png![CADWELD Molds for Cable to Cable Welded Electrical Connection CADWELD Molds for Cable to Cable Welded Electrical Connection](/ImgSmall/Cable-2-Cable---PT---Parallel-Horizontal-Tee.jpg)
CADWELD Molds for Cable to Cable Welded Electrical Connection
/Asset/Cable-2-Cable---PT---Parallel-Horizontal-Tee.jpg![CADWELD Molds for Cable to Ground Rod Welded Electrical Connection CADWELD Molds for Cable to Ground Rod Welded Electrical Connection](/ImgSmall/Cable-2-Ground-Rod---GR.jpg)
CADWELD Molds for Cable to Ground Rod Welded Electrical Connection
/Asset/Cable-2-Ground-Rod---GR.jpg![CADWELD Molds for Cable to Steel Welded Electrical Connection CADWELD Molds for Cable to Steel Welded Electrical Connection](/ImgSmall/VS---Cable-to-Vertical-Steel---Cable-2-Steel-Surface.jpg)
CADWELD Molds for Cable to Steel Welded Electrical Connection
/Asset/VS---Cable-to-Vertical-Steel---Cable-2-Steel-Surface.jpg![CADWELD Molds for Cable to Lug Welded Electrical Connections CADWELD Molds for Cable to Lug Welded Electrical Connections](/ImgSmall/Cable-2-Bus-Lug---LA---Cable-to-Lug.jpg)
CADWELD Molds for Cable to Lug Welded Electrical Connections
LA Lugs and Molds must be ordered separately /Asset/Cable-2-Bus-Lug---LA---Cable-to-Lug.jpg
![CADWELD Molds for Cable to Busbar Welded Electrical Connections CADWELD Molds for Cable to Busbar Welded Electrical Connections](/ImgSmall/Cable-2-Bus-Lug---LJ---Cable-to-Bus-Bar.jpg)
CADWELD Molds for Cable to Busbar Welded Electrical Connections
/Asset/Cable-2-Bus-Lug---LJ---Cable-to-Bus-Bar.jpg![CAST-GROUND-PLATE CAST-GROUND-PLATE](/ImgSmall/CAST-GROUND-PLATE.jpg)
CADWELD Molds for Cast Ground Plates, Receptacles & Studs Welded Electrical Connections
/Asset/CAST-GROUND-PLATE.jpg![65PLUSF20_3 65PLUSF20_3](/ImgSmall/65PLUSF20_3.jpg)
CADWELD® PLUS Weld Metal
The ultimate welded connection that will never loosen, corrode or increase in resistance.ERICO is dedicated to continuous product improvement to meet its customers' needs and maintain the highest level of satisfaction. The introduction of CADWELD® electrical connections in 1938 enabled them to be quickly recognized as the ultimate connection for rail, cathodic, power and grounding applications.
Continuing the tradition of technical leadership, CADWELD® PLUS was developed as a simplified method of performing exothermically welded electrical connections. This trusted system now features a new CADWELD PLUS cup design for the integrated welding material package which has streamlined the installation process by eliminating ignition materials.
The tamper proof, integrated welding material package consists of a steel cup containing CADWELD® patented welding material alloys and an ignition source. This newly shaped welding material package is designed for use in all standard CADWELD® molds, including CADWELD® MULTI. Once placed in the CADWELD® mold, the welding material is electronically ignited using a simple battery-powered control unit with a six-foot lead.
CADWELD® PLUS connections offer all the benefits of conventional CADWELD® connections:
- Current carrying capacity equal to or greater than that of the conductor
- Withstand repeated fault currents without failing during operation
- Permanent, molecular bond that will not loosen or corrode, resulting in a connection with a lifetime equal to that of the installation
- Join copper to copper, copper to galvanized or plain steel, copper to copper clad steel, copper to bronze/brass/stainless steel, steel to steel, etc.
- No external power or heat source required
- Quality Assurance Inspection is easy and visual
- Minimal installation training required
- Exceed requirements of "IEEE® Std 837- Std. for Qualifying Permanent Connections Used In Substation Grounding"
After the termination clip is installed on the ignition strip, the installer pushes and holds the ignition button to start a charging and discharging sequence. Within a few seconds the control unit sends a predetermined voltage to the ignition strip and the reaction is initiated. /Asset/65PLUSF20_3.jpg
![cadweld_metal cadweld_metal](/ImgSmall/cadweld_metal.jpg)
Standard Welding Material
(11)Sold in Standard Packages Only
CADWELD Weld Metal is a mixture of copper oxide and aluminum, packaged by size in plastic tubes. Each tube contains the starting material at the bottom of the plastic tube, with the Weld Metal on top. These materials are not explosive and not subject to spontaneous ignition. These containers are packaged in boxes along with metal disks. Each weld uses one disk.
Five types of CADWELD Weld Metal are used for grounding connections:
- F20 or standard Weld Metal is used for all grounding connections with the exception of those to cast iron or to load bearing rail. The Standard Weld Metal containers have clear (or natural) caps. Standard Weld Metal is also used with most FX molds.
- XL Weld Metal is used with EXOLON molds. EXOLON Weld Metal containers have white caps.
- XF-19 Alloy Weld Metal is used for all connections to cast iron such as Type HB and others. XF-19 Weld Metal containers have orange caps.
For DUCTILE IRON, see Section 3, Cast Iron Connections - CADWELD F80 Alloy Weld Metal is used for all connections to load bearing rail such as Type W Bonds. F80 Weld Metal containers have yellow caps.
- Cathodic connections require different weld metal and molds. Contact ERICO for cathodic connection applications.