Skip To Content
mail_outline phone 800.476.5539

Catalog

  • Type W Bonds are for bonding and grounding of standard rails. These bonds are welded to the web of rail sections 85 lb. to 140 lb.
  • Mold frame includes adjusting screw to position bond at neutral axis of rail where stresses are minimal.
  • Contact ERICO for crane and girder rails.
  • Concentric stranded copper cable is listed.
  • NOTE: Rail materials characteristics, use and location of weld should be considered when selecting connections to a rail.
Request Information
Unit of Measure
Items
Cable To Rail and Structures Molds - W

Cable To Rail and Structures Molds - W
Price Each $232.08
Cable To Rail and Structures Molds - W

Cable To Rail and Structures Molds - W
Price Each $232.08
Cable To Rail and Structures Molds - W

Cable To Rail and Structures Molds - W
Price Each $232.08
Cable To Rail and Structures Molds - W

Cable To Rail and Structures Molds - W
Price Each $232.08
Cable To Rail and Structures Molds - W

Cable To Rail and Structures Molds - W
Price Each $232.08
Type N/A Factory Made N/A Factory Made N/A Factory Made N/A Field Made N/A Field Made
Cable Size N/A 1/0 N/A 2/0 N/A 4/0 N/A 1/0 N/A 2/0
Joint Bond N/A W12C-(length) N/A W12G-(length) N/A W12Q-(length) N/A WRS-05-RH (-LH) N/A WRS-03-RH (-LH)
Stub End Bond N/A W32C-(length) N/A W32G-(length) N/A W32Q-(length) N/A N/A
Web Welder Part No. N/A WRS-2C-RH (-LH) N/A WRS-2G-RH (-LH) N/A WRS-2Q-RH (-LH) N/A WRS-05-RH (-LH) N/A WRS-03-RH (-LH)
Sleeve N/A N/A N/A N/A S05F N/A S03F
Hammer Die N/A N/A N/A N/A WD80 N/A WD84
Weld Metal No. N/A 65F80 N/A 90F80 N/A 90F80 N/A 65F80 N/A 90F80
Weld Metal Number N/A , Standard Welding Material ($230.62)
 		N/A , Standard Welding Material ($160.15)
 		N/A , Standard Welding Material ($160.15)
 		N/A , Standard Welding Material ($230.62)
 		N/A , Standard Welding Material ($160.15)
Required Tools for Standard Weld N/A , Flint Ignitor ($17.58)
Required Tools for Cadweld Plus N/A , CADWELD Handle Clamp for C mold ($144.12)
, CADWELD® PLUS Weld Metal Control Units ($351.52)
, Flint Ignitor ($17.58)
Suggested Tools N/A , Slag Removal Spade ($8.38)
, Slag Removal Spade ($8.38)
, Surefire™ Torch Head ($229.46)
, Cable Cleaning Brush ($21.21)
, Rasp ($320.93)
, Mold Cleaning Brush ($14.27)
Product Class N/A BK
Units Per Package N/A 1
Inventory Item N/A In Stock
How To Order Factory Made Bonds N/A
  1. Order bond giving bond length in inches.
    a. Joint bonds must be at least 10 inches longer than rail angle bar.
    b. Stub-End bonds must be 9 inches minimum.Specify right hand (RH) or left hand (LH).
  2. Order welder (mold with frame and rail clamp) by right hand and/or left hand. Includes flint ignitor.
  3. Replacement molds and weld metal are furnished with bonds as follows:
    Joint bonds: Two weld metals per bond, plus one each right and left hand mold for every 80 bonds.
    Stub-End bonds: One weld metal per bond, plus one mold only for every 80 bonds.
N/A
  1. Order bond giving bond length in inches.
    a. Joint bonds must be at least 10 inches longer than rail angle bar.
    b. Stub-End bonds must be 9 inches minimum.Specify right hand (RH) or left hand (LH).
  2. Order welder (mold with frame and rail clamp) by right hand and/or left hand. Includes flint ignitor.
  3. Replacement molds and weld metal are furnished with bonds as follows:
    Joint bonds: Two weld metals per bond, plus one each right and left hand mold for every 80 bonds.
    Stub-End bonds: One weld metal per bond, plus one mold only for every 80 bonds.
N/A
  1. Order bond giving bond length in inches.
    a. Joint bonds must be at least 10 inches longer than rail angle bar.
    b. Stub-End bonds must be 9 inches minimum.Specify right hand (RH) or left hand (LH).
  2. Order welder (mold with frame and rail clamp) by right hand and/or left hand. Includes flint ignitor.
  3. Replacement molds and weld metal are furnished with bonds as follows:
    Joint bonds: Two weld metals per bond, plus one each right and left hand mold for every 80 bonds.
    Stub-End bonds: One weld metal per bond, plus one mold only for every 80 bonds.
N/A N/A
How To Order Field Made Bonds N/A N/A N/A N/A
  1. One sleeve per cable end to be welded to rail.
  2. One or more hammer die per job.
  3. One welder for each welding crew. Right hand and/or left hand.
  4. One mold for every 50 to 80 bonds after first 50. Right hand and/or left hand.
  5. One weld metal per cable end to be welded.
 N/A
  1. One sleeve per cable end to be welded to rail.
  2. One or more hammer die per job.
  3. One welder for each welding crew. Right hand and/or left hand.
  4. One mold for every 50 to 80 bonds after first 50. Right hand and/or left hand.
  5. One weld metal per cable end to be welded.
Order Note N/A If you choose the CADWELD PLUS WELD METAL system, please be sure to include the CADWELD Ignitor with your order.
Normal Stock N/A No