Ballast bypass required.
Unit of Measure
Specifications
|
Product Information - Case
|
Dimensions
|
Photometric Characteristics
|
General Characteristics
Specifications
Brands |
N/A GE® |
Fixture Rating |
N/A Open and Enclosed Rated |
Input Voltage |
N/A 277 to 480 V |
Replacement Watts |
N/A 1,000 W |
Design Lights Consortium (DLC) |
N/A Yes |
| Location Rating1 | N/A Damp |
-
1 UL 1993 Environmental Requirements for LED LAMPS
Location, damp - Exterior or interior location that is normally or periodically subject to condensation of moisture in, on, or adjacent to, electrical equipment, and includes partially protected locations.
Location, dry - Location not normally subject to dampness, may include a location subject to temporary dampness, i.e., building under construction, provided ventilation is adequate to prevent an accumulation of moisture.
Location, wet - Location in which water or other liquid can drip, splash, or flow on or against electrical equipment.
Not suitable for air-tight explosive or hazardous fixtures.
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property of their respective owners. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of the General Electric Company. © 2019 GE.
LEDL051 (Rev 03/28/2019) - 2 Minimum order quantity = 1
- 3 The life rating is based on the hours of operation the lamp will provide before reaching 70% of its original rating (L70)
