United Electrical Distributors
United Electrical Distributors
2 Skyview Drive
Greenville, SC 29607
Phone: 800.476.5539
Fax: 864.233.0681
Email: info@uedinc.com
Website: www.uedinc.com
Print Back
  • Type W Bonds are for bonding and grounding of standard rails. These bonds are welded to the web of rail sections 85 lb. to 140 lb.
  • Mold frame includes adjusting screw to position bond at neutral axis of rail where stresses are minimal.
  • Contact ERICO for crane and girder rails.
  • Concentric stranded copper cable is listed.
  • NOTE: Rail materials characteristics, use and location of weld should be considered when selecting connections to a rail.
Unit of Measure

Specifications

Type

 N/A Factory Made

Cable Size

 N/A 1/0

Joint Bond

 N/A W12C-(length)

Stub End Bond

 N/A W32C-(length)

Web Welder Part No.

 N/A WRS-2C-RH (-LH)

Weld Metal No.

 N/A 65F80

Weld Metal Number

 N/A 65, Standard Welding Material ($200.63)

Product Class

 N/A BK

Units Per Package

 N/A 1

Inventory Item

 N/A In Stock

Normal Stock

 N/A No

Required Tools for Standard Weld

Required Tools for Standard Weld

 N/A T320, Flint Ignitor ($15.30)

Required Tools for Cadweld Plus

Required Tools for Cadweld Plus

 N/A L160, CADWELD Handle Clamp for C mold ($125.38)
PLUSCU2L6, CADWELD® PLUS Weld Metal Control Units ($305.80)
T320, Flint Ignitor ($15.30)

Suggested Tools

Suggested Tools

 N/A B-136-A, Slag Removal Spade ($7.29)
B-136-B, Slag Removal Spade ($7.29)
T111, Surefire™ Torch Head ($199.62)
T313, Cable Cleaning Brush ($18.45)
T321, Rasp ($279.19)
T394, Mold Cleaning Brush ($12.41)

How To Order Factory Made Bonds

N/A

  1. Order bond giving bond length in inches.
    a. Joint bonds must be at least 10 inches longer than rail angle bar.
    b. Stub-End bonds must be 9 inches minimum.Specify right hand (RH) or left hand (LH).
  2. Order welder (mold with frame and rail clamp) by right hand and/or left hand. Includes flint ignitor.
  3. Replacement molds and weld metal are furnished with bonds as follows:
    Joint bonds: Two weld metals per bond, plus one each right and left hand mold for every 80 bonds.
    Stub-End bonds: One weld metal per bond, plus one mold only for every 80 bonds.

Order Note

N/A If you choose the CADWELD PLUS WELD METAL system, please be sure to include the CADWELD Ignitor with your order.